All drawer side material is produced from domestic plywood with a Fir veneer core. All sizes have a 1/4″ groove along the bottom (bottom of groove is 1/2” up from bottom of drawer side) and have a UV prefinished edgebanded veneer top.
1/2″ C-C Maple 5-ply VC UV Face & Back
3″ x 8′
4″x 8′
5″x 8′
6″x 8′
7″x 8′
8″x 8′
9″x 8′
10″x 8′
12″x 8′
5/8″ C-C Maple 7-ply VC UV Face & Back
3″x 8′
4″ x 8′
5″ x 8′
6″x 8′
7″x 8′
8″ x 8′
9″ x 8′
10″ x 8′
12″ x 8′
Pre-finished drawer sides made out of premium clear Baltic Birch plywood. Baltic Birch plywood has no voids in the plys and is very durable. The drawer sides are 7/16″ thick and 5 feet long. Pre-finished with a clear coat. Kerfed and nosed for drawer bottoms for easy installation.
Use Website In a Screen-Reader Mode
Accessibility Screen-Reader Guide, Feedback, and Issue Reporting
Skip to Content
↵
ENTER
Skip to Menu
↵
ENTER
Skip to Footer
↵
ENTER
Brea, CA
(800) 422-4389
Need help?
Home
What are you looking for?
Search
Scan barcode
Sign in / Register
0
Cart
Categories
Quick Order
Resources
Laminate Finder
Home
Woodworking and Shop Supplies
Drawer Slides & Systems
Drawer Materials
Shop Würth Louis And Company
Drawer Side Material, 1/2″ Groove, 1/2″ Thick, 4″ x 96″, Maple
High quality Maple drawer side material with 1/2″ groove and 1/2″ thickness from Würth Louis And CompanyView image 1
Pre-finished 4″ high Maple drawer side material with 1/4″ bottom dado and 1/2″ bottom reveal for undermount slidesView image 2
High quality Maple drawer side material with 1/2″ groove and 1/2″ thickness from Würth Louis And Company
Pre-finished 4″ high Maple drawer side material with 1/4″ bottom dado and 1/2″ bottom reveal for undermount slides
Item # BHK04X8G-MPL
Mfr # SB102ME1/2
$15.28
/Each
5 items
$13.79/Each
25 items
$13.33/Each
Height: 4″
4″
In Stock
185 in stock at Brea, CA
PO # / Job Name
PO # / Job Name
QTY / EACH
Reduce quantity
Quantity
1
Increase quantity
Add to cart
Min Order: 1
Qty mult. by: 1
Add to list
Product Details
Features:
• 4″ high drawer side material in Maple
• BHK high quality drawer blank systems are available veneer plywood
• All wood blanks are pre-finished with “Endura” ultra violet cured top coat and are ready to assemble
• All drawer blanks have 1/4″ drawer bottom dado and a 1/2″ (13mm) bottom reveal designed for undermount slides
• Blank lengths are 8′
• Blanks have a square edge profile
This product can expose you to chemicals including Formaldehyde (gas), which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
Box Quantity 1
Thickness 1/2″
Length 96″
Finish Maple
Height 4″
Product Type Drawer Side Material
Groove 1/2″
The Würth Louis And Company Difference
For over 45 years, Würth Louis and Company has elevated the woodworking industry through exceptional service, quality, and convenience to ensure a seamless experience every time. With flexible ordering options, a comprehensive selection of products, and next-day delivery, we cater to all your woodworking and shop supply needs.
We appreciate your trust in our expertise and dedication to providing you with the best tools and materials, helping you achieve outstanding results in your projects.
We are committed to offering:
Expert Support & Guidance:
Highly trained representatives to assist with your projects.
Fast & Reliable Delivery:
Next-day shipping to keep your workflow on track.
Comprehensive Product Selection:
From cabinet parts to decorative hardware, we have it all—The right machinery. The right tools. The right supplies.
Flexible Ordering Options: Order online 24/7 or speak with our sales team
BUY “YOUR WAY”
Order by 24/7 by web, contact our sales reps or call by phone.
ONE STOP SHOP
What you need, when you need it, all in one place.
NEXT DAY DELIVERY
Orders are shipped next day.
EXPERT SUPPORT TEAM
Advice and support from knowledgeable professionals.
Need help? Call (800) 422-4389
Prefinished Plywood Drawer Box
Rated 4.90 out of 5 based on 673customer ratings
(673 customer reviews)
Dowel Drawer Box – AssembledDowel Drawer Box UnassembledDowel Drawer Box Dimensions
Dowel Drawer Box – AssembledDowel Drawer Box UnassembledDowel Drawer Box Dimensions
View Assembly Video
$24.99
Customize Your Prefinished Plywood Drawer Box
Click for Conversion Table. Enter exact product dimensions in decimal form.
Pre Finished Maple Plywood comes in 4′ x 8′ Sheets available in 1/4 inch, 1/2 inch and 3/4 inch thickness. The sapwood color ranges from nearly white, to an off-white cream color, sometimes with a reddish or golden hue. The heartwood tends to be a darker reddish brown.
Pre Finished Maple Plywood Stock
Face Backing Core Sides
1/4 in A 4 MDF 1
1/2 in C 2 Veneer 2
3/4 in C 2 Veneer 1
3/4 in C 2 Veneer 2
Need a Special Order!
If you need sizes or grades of Pre Finished Maple Plywood that we don’t stock contact us a call we can provide what your looking for!
Pre-Finished Maple Plywood
Home | Homepage | Plywood | Hardwood Plywood | Pre Finished Maple Plywood
↵ back
Pre Finished Maple Plywood
Pre Finished Maple Plywood
$58.25 – $134.50
(be the first to review)
Size: 4′ x 8′
Thickness: 1/4″, 1/2″ & 3/4″
Pre Finished
Please contact us for a quote
P. 909.920.5430
Sizes
1/4A4
Clear
$58.25
Pre Finished Maple Plywood quantity
1
ADD TO CART
SKU: MAPP5248A4UV1S
Category:
Hardwood Plywood
Tags:
1/2 in, 1/4 in, 3/4 in, maple, plywood, pre finished
Description
Additional information
Reviews (0)
Shipping Info
Pre Finished Maple Plywood comes in 4′ x 8′ Sheets available in 1/4 inch, 1/2 inch and 3/4 inch thickness. The sapwood color ranges from nearly white, to an off-white cream color, sometimes with a reddish or golden hue. The heartwood tends to be a darker reddish brown.
Pre Finished Maple Plywood Stock
Face Backing Core Sides
1/4 in A 4 MDF 1
1/2 in C 2 Veneer 2
3/4 in C 2 Veneer 1
3/4 in C 2 Veneer 2
Need a Special Order!
If you need sizes or grades of Pre Finished Maple Plywood that we don’t stock contact us a call we can provide what your looking for!
Face Types
Back Types
Core Types
AA-Grade Face
Highest quality veneer you can specify in any particular species. The veneer will be smooth, tight cut, and full length and free of any visible defects or abnormalities.
A-Grade Face
An “A” face on hardwood plywood should be matched for both grain and color. All veneer splices should be book-matched for a visually pleasing appearance. There should not be any abrupt changes in color or grain between the splices. An “A” face will not permit sound knots, repaired knots or rough-cut veneer. An A face may allow slight mineral streak and/or vine marks. The number of defects such as pin knots or small burls varies according to the specie of veneer. This is the best face grade on plywood normally stocked and is often used for upper-end cabinetry, architectural millwork, and quality furniture.
B-Grade Face
A “B” face on hardwood plywood should be matched for a pleasing color, but not necessarily for grain. “B” grade faces are generally very similar to “A” faces, but do allow some sound or repaired knots and some slight rough cut veneer. “B” grade faces will also allow slight mineral streak and vine marks.
C-Grade Face
A “C” face on hardwood plywood allows for unlimited pin knots and small burls. A “C” face can also contain repaired knots and sound knots. The “C” grade will also allow unlimited mineral and vine marks. A “C” face should be a sound smooth face. A “C” face is used primarily on paint grade type panels, in lower-end case work, and for cabinet interiors in upper-end cabinetry.
To learn more about plywood please visit our friends at Timber Products who have put together a useful documents page.
Hardwood Lumber
Exotic Lumber
Lumber Project Packs
Plywood
Baltic Birch Plywood
Hardwood Plywood
African Mahogany Plywood
Ash Plywood
Cherry Plywood
Vertical Grain Doug Fir Plywood
Maple Plywood
Pre Finished Maple Plywood
Red Birch Plywood
Red Oak Plywood
Red Oak Quarter Sawn Plywood
Walnut
Walnut Plywood
White Birch Plywood
Prefinished White Birch Plywood
White Oak Plywood
Quarter Sawn White Oak Plywood
Rift Sawn White Oak Plywood
Melamine
MDF Panels & Particleboard
High Pressure Laminates
Veneers
Mouldings
Hardware
Wood Carvings
Medallions
Stair Components
Shutter Components
Board Foot Calculator
Face Types
Back Types
Core Types
AA-Grade Face
Highest quality veneer you can specify in any particular species. The veneer will be smooth, tight cut, and full length and free of any visible defects or abnormalities.
A-Grade Face
An “A” face on hardwood plywood should be matched for both grain and color. All veneer splices should be book-matched for a visually pleasing appearance. There should not be any abrupt changes in color or grain between the splices. An “A” face will not permit sound knots, repaired knots or rough-cut veneer. An A face may allow slight mineral streak and/or vine marks. The number of defects such as pin knots or small burls varies according to the specie of veneer. This is the best face grade on plywood normally stocked and is often used for upper-end cabinetry, architectural millwork, and quality furniture.
B-Grade Face
A “B” face on hardwood plywood should be matched for a pleasing color, but not necessarily for grain. “B” grade faces are generally very similar to “A” faces, but do allow some sound or repaired knots and some slight rough cut veneer. “B” grade faces will also allow slight mineral streak and vine marks.
C-Grade Face
A “C” face on hardwood plywood allows for unlimited pin knots and small burls. A “C” face can also contain repaired knots and sound knots. The “C” grade will also allow unlimited mineral and vine marks. A “C” face should be a sound smooth face. A “C” face is used primarily on paint grade type panels, in lower-end case work, and for cabinet interiors in upper-end cabinetry.
To learn more about plywood please visit our friends at Timber Products who have put together a useful documents page.
Drawer Width (in)
Drawer Depth (in)
Drawer Height (in)
Assembly
Select an option…
Custom Notes
1x Prefinished Plywood Drawer Box
$0.00
Subtotal $0.00
Prefinished Plywood Drawer Box quantity
1
ADD TO CART
SKU D300T63B25R50 Categories Doweled Drawer Boxes, Drawer Boxes
Description How to Measure Reviews (673)
Made from 9 ply Baltic Birch, this drawer box is the perfect combination of economy and quality. By limiting some options, this drawer box becomes very affordable. They come unassembled with pre-glued dowels inserted for quick and easy assembly. Drawer sides are 5/8” 9 ply Baltic Birch with edge banding on the top edge, and a ¼” thick plywood bottom that is recessed up ½”. These boxes are designed for side mount slides only and require a drawer front. These drawer boxes come with a durable clear lacquer topcoat.
Fast Assembly with Pre-Inserted Dowels; Ships unassembled
5/8″ 9-Ply Baltic Birch sides, 1/4″ Plywood Bottom
Tops of sides have a PVC Edgebanding
Finished in a Durable Clear Satin Conversion Varnish
Requires a drawer front to cover face
Minimum and Maximum Dimensions
Width: 5″ – 24″
Depth: 5″ – 24″
Height: 3″ – 12″
Since 1971, BHK has been producing quality drawer and component systems for the woodworking industry. BHK offers the largest variety of quality drawer and component systems to help you sell competitively. Our 30+ years in the drawer making industry has established us as an industry leader with experience, dependable service, product customization and product availability. Applications for the BHK product line are limitless! They range from traditional furniture including kitchens, baths, bedrooms to RTA (ready to assemble) furniture, as well as institutional/hospitality furniture, closets and general display purposes.
FROM ONE DRAWER TO ONE MILLION— BHK has your drawers ready to assemble or pre-assembled with on time delivery!
Committed to the Environment
BHK of America is committed to business practices that result in the encouragement of sustainable forestry practices around the world. Our environmental policy and practices are in compliance with environmental regulations, conducting of operations in an environmentally sound manner and applying the principles of reduce, reuse and recycle in all processes. BHK adheres to the standards and rules of the following:
All products manufactured are in compliance with current CARB I and CARB II standards.
All imported wood substrates are required to be in compliance with the LACEY Act.
FSC® (Forest Stewardship Council®) certified products are available upon request.
GREENGUARD certified products are available upon request.
Wood Blanks
Take a BHK Blank, make four straight cuts. Fasten with staples, screws or drilling and doweling. Just a few simple cuts and you have a quality finished drawer.
Items subject to change without notice, including stock status and availability. Products change rapidly, and may be available even if not listed online. Please contact us for further information.
Stay in the Loop with Exclusive Offers! 🔔
Advanced notice of the latest offers, new products, and member-only deals.
BHKSIDES MAPLE DRAWER SIDE PREFINISHED
Approved US Government Vendor
Cage Code: 0P072
The logo of Viking Cloud
Forest Stewardship Council
VENDER FREIGHT
ROUTING
Copyright © 2025, Würth Louis and Company. All Rights Reserved. All logos are Trademarks of their respective owners.
Privacy Policy
Terms of Sale
Do Not Sell My Personal Information
Made with Premium clear Baltic Birch Plywood
5 feet long
Available in 4″ to 12″ widths
7/16″ thick for all widths, also available in 5/8″ thick for 4″ and 8″ widths
Pre-finished with a clear coat
1/4″ x 1/4″ Kerf for drawer bottoms
1/2″ spacing between kerf cut and bottom of drawer side
Sanded smooth and slightly rounded at top for a finished edge.
– 3-3/8″ and 4-1/2″ heights are made of a single piece of maple
– 6-1/4″ height is made of a single piece or 2 glued pieces of maple
– 7-1/8″ and 8-1/4″ heights are made of 2 or 3 glued pieces of maple
– 10-1/4″ height is made of 3 or 4 glued pieces of maple